Object Space Resolution
This is Section 2.2 of the Imaging Resource Guide
In order to determine the absolute minimum resolvable spot that can be seen on the object, the ratio of the field of view to the sensor size needs to be calculated. This is also known as the Primary Magnification (PMAG) of the system.
The ratio associated with system PMAG allows for the scaling of the imaging space resolution which tells us the resolution of the object.
Generally when developing an application, a system’s resolution requirement is not given in lp/mm, but rather in microns (μm) or fractions of an inch. There are two ways to make this conversion:
While one can quickly jump to the limiting resolution on the object by using the last formula, it is very helpful to determine the imaging space resolution and PMAG to simplify lens selection. It is also important to keep in mind that there are many additional factors involved, and this limitation is often much lower than what can be easily calculated using the equations.
Resolution and Magnification Calculation Examples using a Sony ICX625 sensor
Pixel Size = 3.45μm x 3.45μm
Number of Pixels (H x V) = 2448 x 2050
Desired FOV (Horizontal) = 100mm
Limiting Sensor Resolution: