Microscopy Mechanics

• Mounts for Simple Lenses, Achromats, Filters, or Reticles
• Designed to Integrate with Any C, S, or T-Mount Components
• Optic is Held in Place with Included Retaining Ring

• Used for Adding a Fixed Tube Extension to Optical Systems
• Feature Male/Female Threads at Opposite Ends
• Black Anodized Aluminum Construction

• Acktar Hexa-Black™ Light Absorbing Technology
• Reduce Stray Light and Noise in Imaging Systems
• Near Zero Specular Reflectance at Grazing Angles
• Stray Light Rejection Ratio up to 8 x 10^-7

• Finely Threaded Internal Barrel for Fine Focus Adjustments
• Inner Diameter Baffle Thread for Stray Light Reduction
• Knurled Lip on Female End for Controlled Adjustments

• Fit Over Male C, S, and T-Mount Threads
• Wide Range of Thicknesses Available for Accurate Spacing
• Spacer Ring Kits Available

• Integrate Polarizers into C, S, or T-Mount System
• Provide Polarizer Rotation Up to 90° within Holder
• Designed to Hold 12.5, 20, 25, or 50mm Diameter Polarizers
• Adapters Available for Mounting 12.5 and 25mm Square Polarizers

• Compatible With 12.5mm, 15mm, and 25mm Diameter Optics
• Male and Female C-Mount Threads
• Provides Linear Travel Without Rotating Optical Components

• Manual 360° Rotation
• Available with Pre-Mounted Linear Polarizer
• Compatible with T-Mount Optic Mounts

• Male and Female C- and T-Threads for Easy Integration
• Simple On/Off Operation with TTL Input
• M6 and ¼-20 Tapped Holes for Post Mounting

• Variable Apertures for C, S, and T-Mount Systems
• Male and Female Thread at Opposite Ends for Easy Integration
• Adjusted via Rotating Ring or Lever for Precision Control

• Imaging Lens System for Prototyping
• Ideal for Identifying Desired Magnification and f/#
• Compatible with Helicoid Barrel for Use With C-Mount Cameras

• C-Mount, S-Mount, SM1, and SM05 Threading
• Low Profile Designs for Minimal System Intrusion
• Available for SMA, FC, FC/APC, or ST Fiber Connectors

• Cage and Tube System Compatible
• Holds 25mm Filters
• 6 Discrete Positions

• Optic Cells Can Mount Square or Circular Optics
• Complete Holder Requires One Housing and One Optic Cell
• Available with M6 or ¼-20 Tapped Holes for Post Mounting

• C, S, and T-Mount Solutions for Mounting Cube and Plate Beamsplitters, Filters, and Mirrors
• Provides a 90° Mounting Interface
• ¼ -20 and M6 Tapped Mounting Threads for English or Metric Based Systems

• Allow for Kinematic Adjustment of C, S, and T-Mount Components
• Horizontal Mounting Adapters Available
• Removable Turning Knobs for Hex Key Access

• C-Mount and Cage System Compatible
• M6 Mounting Hole
• Compatible with Most TECHSPEC® Kinematic Mounts

• C and T-Mount Components Ideal for System and Prototype Design
• Allow for Integration into Tube and Benchtop Systems
• Note: Potential change of packaging

• Allow for Post Mounting C, S, and T-Mount Tube System Assemblies
• ¼-20 or M6 Tapped Mounting Options
• Black Anodized Aluminum Construction

• Adapt All Available Tube System Thread Types to One Another
• Low Profile Design to Minimize Extension Length
• Black Anodized Aluminum Construction

• Maximize C, S, and T-Mount Tube Connection Compatibilities
• Female or Male Thread Options
• Rotating Rings Also Available

• Integrate C and T-Mount Components into Imaging Systems
• Compatible with M22.5 to M40.5 Machine Vision Threads
• Step-Up Design Prevents Vignetting

• Integrate Microscope Objectives to Create Digital Microscope Systems
• Feature Male C-Mount, T-Mount, or ID1 (SM1) Thread and Female Objective Thread
• Black Anodized Aluminum Construction

• Adapt Light Guides to Optical Components
• C-Mount and T-Mount Versions Available
• Articulating Arm Package Available

• Integrate Eyepieces into C and T-Mount Systems
• Feature Male C and T-Mount Thread
• Black Anodized Aluminum Construction

• C and S-Mount Thread for Easy Integration
• Low Profile Designs for Minimal System Intrusion
• Accepts Common Laser Diodes or Photodiodes

• Pre-Mounted 90 Degree Interface
• Four C-Threaded Mounting Holes
• Several Beamsplitting Options Available
• Additional C-Mounted Beamsplitters, Filters, and Mirrors Available

• Allows C-Mount Video Camera to Accept 35mm SLR Camera Lens

• Turns Standard 35mm SLR Cameras Into T-mount
• Use With T-Components

• Compatible with DIN Standard Objectives
• Integrate Objective with DIN Eyepiece or C-Mount Camera
• Objective and Eyepiece Not Included

• C-Mount Tube System Compatibility for Creating Modular Microscope System
• Four Objective Positions
• Mitutoyo and Nikon Objective Compatibility

• Provide Stable Platform for Experiments and Test Configurations
• 1/4-20 TPI or M6 Tapped Holes for Various Mounting
• Black Anodized Aluminum

• Greater Than 90% Isolation Efficiency
• Superior Honeycomb Structure
• Low Profile Thickness of 2”
• Stainless Steel, Oil-free, Spill Proof Optical Top

• Absorb and Dissipate Vibration
• Stabilize Equipment up to 152lbs
• English, Metric, or Universal Styles

• Passive Vibration Isolation
• Lightweight, Compact Profile for Easy Portability
• Self-Leveling Design with Height Control Valves

• English and Metric Versions
• ¼-20 Base for English Version and M6 x 1 Base for Metric Version
• Provides Vertical Translation
• Compatible With 0.5" (12.7mm) Posts

• Mount and Set in Unique Orientations
• Mix and Match for Custom Mounting Combinations
• Lockable Angular Positioning

• Male 8-32 or ¼-20 Stud, Female ¼-20 Base
• Posts Include Interchangeable Male Stud and Removable Base S.H.S.S.
• Available in Variety of Lengths
• Metric Versions Also Available

• Male M4 x 0.7 or M6 x 1.0 Stud, Female M6 x1.0 Base
• Posts Include Interchangeable Male Stud and Removable Base S.H.S.S.
• Available in Variety of Lengths
• English Versions Also Available

• Locks Post Height Without Removing Post
• Allows Basic Post Rotation
• For Our 0.5" (12.7mm) Diameter English and Metric Posts
• Aluminum Collar

• English & Metric Post Holders
• English: ¼-20 Base
• Metric: M6x1 Base
• Unique 3-Point Contact Design
• Aluminum with Brass Inserts

• Basic Building Block for Optical Systems
• Fixed Options for Mounting 12.7mm to 12.7mm or 12.7mm to 12.0mm Posts Available
• Rotatable Option for 12.7mm to 12.7mm Posts
• Aluminum Mount Construction

• Metric, English and Common Slotted Versions
• Standard ¼-20 or M6 x 1.0 Holes/Slots or AllSlots
• Large and Small Sizes
• Black Anodized Aluminum Construction

• Crossed V-Groove for Centering Optics Vertically and Horizontally
• Mount Optics up to 118mm Diameter
• M6 x 1.0 or ¼-20 TPI Mounting Thread for Post Mounting Applications

• Non-Marring Surface
• 3 Sizes Available
• M6 x 1.0 mounting hole
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• Manual or Automated Multi-Directional Control
• Interchangeable Filter Retaining Wheels
• Lightweight Design with Multiple Mounting Options

• USB or RS-232 Interface
• Bi-Directional Movement
• C-Mount and T-Mount Adapters Available

• Simple Mounting Arrangement
• Metric and English Configurations
• Black Anodized Aluminum Construction
• Posts and Post Holders Required for Mounting

• Holds Six or Twelve Filters
• Accepts 1" / 25mm or ½" / 12.5mm Diameters
• 12 Index Positions for Precise Movement

• Ideal for Mounting and Centering Circular Optics and Laser Tubes
• Protective Nylon Tipped Screws
• 1/4-20 TPI Mounting Thread for Post Mounting Applications

• Rugged, Black Anodized Aluminum Construction
• Fine Lead Screw for Precision Movement
• Large Adjustment Knob for Maximum Control
• Locking Knob to Secure Vertical Positioning

• Fine Micrometer Movement
• Available in Four Sizes
• Black Anodized Aluminum
• Locking Knob

• 100μm Range of Motion
• 1.5nm High Resolution Positioning
• Interchangeable Quick Mount Adapters

• Mechanically Compatible with our TECHSPEC® Stages
• Fine Micrometer Movement
• Locking Screw on Stages

• High Accuracy, 25mm, 50mm, 100mm, and 200mm Travel Options
• Integrated Motor and Controller
• Available with Integrated, 200 Counts per Revolution (CPR) Motor Mounted Encoder
• Easily Configurable in X-Y or X-Y-Z Configurations

• High Speed, 75mm, 150mm, 300mm, 450mm, and 600mm Travel Options
• Controlled Manually or via RS-232 Serial Interface
• Available with Integrated, 500 Counts per Revolution (CPR) Motor Mounted Encoder
• No Adapter Required for X-Y-Z Configurations