• Country/Region
  •   
 
See all 9 Products in Family

Coherent® Beam Position Thermopile Power Sensors 1168339 | 10mW-3W

Stock #68-627
$1,595.00
Qty 1
$1,595.00
Volume Pricing
Request a Quote
Minimum Power (mW):
10
Power Range:
10mW - 3W
Wavelength Range (μm):
0.25 - 10.6
Active Area Diameter (mm):
19
Cooling Method:
Air
Model Number:
LM-3
Coherent Part Number: 1168339
Type:
Meterless
Type of Sensor:
Quad Element Thermopile
Length of Cable (m):
2.50
Linearity (%):
±1
Computer Interface:
USB
Maximum Incident Power Density (kW/cm2):
6
Calibration Uncertainty (%):
±2
Calibration Wavelength (nm):
10,600
Long Pulse Joule Mode Range (J):
0.5 - 10
Long Pulse Joule Mode Accuracy (%):
±3
Spectral Compensation Accuracy (%):
±1.5
Maximum Incident Energy Density:
600mJ/cm2 (10ns, 1064nm)
Maximum Incident Beam Power (W):
3

Regulatory Compliance

RoHS 2015:

Product Family Description

  • Thermopile Detector Element for High Power Measurements
  • Measure Beam Position on Detector Surface
  • ISO 17025 Certified

Coherent® Beam Position Sensing Thermopile Power Sensors are all-purpose sensors designed to measure the average power or energy of a wide variety of continuous wave or pulsed lasers. Coherent Beam Position Sensing Thermopile Power Sensors utilize a quadrant thermopile detector disk to sense the position of the laser beam on the detector surface while measuring the laser power. Coherent thermopile sensors can operate across a wide range of input powers, and do not saturate.

Note: The LM-20 is designed for embedded use and must be mounted on a heat sink.

Need a Quote? Add a stock number to begin our two-step quote process.

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram

PROUD MEMBERS OF:

ACMAApomaThe Laser InstituteOSASPIE

×