eo_logo
  • Country/Region
  • cart   
 
See all 36 Products in Family
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

632.8nm, 12.5mm Diameter, OD 4.0 Notch Filter

TECHSPEC OD 4.0 Notch Filters

×
TECHSPEC OD 4.0 Notch Filters
Stock #67-111
$245.00
×
Qty 1-5
$245.00
Qty 6+
$196.00
Volume Pricing
Request Quote
Diameter (mm):
12.50 +0.00/-0.10
Clear Aperture CA (mm):
10.6
Center Wavelength CWL (nm):
632.80
Optical Density OD (Average):
≥4.0
Coating:
Hard Coated
Full Width-Half Max FWHM (nm):
31.60
Full Width-Half Max FWHM Tolerance (nm):
±3.2
Surface Quality:
60-40
Thickness (mm):
5.00
Thickness Tolerance (mm):
±0.1
Transmission (%):
90
Transmission Wavelength (nm):
475 - 845
Type:
Notch Filter
Construction:
Mounted in Black Anodized Ring
Reflection at CWL (%):
99
Transmitted Wavefront, RMS:
<1λ
Mount Thickness (mm):
5.0

Regulatory Compliance

RoHS 2015:
Reach 219:

Product Family Description

TECHSPEC® OD 4.0 Notch Filters are low-cost alternatives to Rugate Notch Filters. TECHSPEC OD 4.0 Notch Filters feature narrow rejection bands of just ±2.5% of the center wavelength while offering greater than 99% reflection of the laser wavelength. These optical filters are hard coated to guarantee performance that will not degrade with time, temperature, or humidity. Each optical filter has been mounted in a black anodized ring that has been engraved to ease filter handling, identification, and orientation.

Note: These filters are optimized for high spectral performance rather than high Laser Induced Damage Thresholds (LIDT). A typical LIDT for these filters is 1 J/cm2 @ 532nm, 10ns. Please contact us if you require a filter with a higher LIDT value.

All mounted TECHSPEC® Optical Filters have an arrow on the side of the mount that points to the filter-coated surface for quick reference. Filter oriented such that arrow points to filter coated surface S1. Anti-reflective (AR) coating is applied to S2.
All mounted TECHSPEC® Optical Filters have an arrow on the side of the mount that points to the filter-coated surface for quick reference. Filter oriented such that arrow points to filter coated surface S1. Anti-reflective (AR) coating is applied to S2.
×