eo_logo
  • Country/Region
  • cart   
 
See all 159 Products in Family
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

500nm CWL, 12.5mm Dia. Hard Coated OD 4.0 50nm Bandpass Filter

Stock #84-771
$140.00
×
Qty 1-5
$140.00
Qty 6+
$112.00
Volume Pricing
Request Quote
Diameter (mm):
12.50 +0.0/-0.1
Center Wavelength CWL (nm):
500.00
Full Width-Half Max FWHM (nm):
50.00
Minimum Transmission (%):
≥90
Optical Density OD (Average):
≥4.0
Coating:
Hard Coated
Typical Applications:
BD Horizon V500, DiO, PKH67, Acridine Orange, ATTO 488, ratiometric pHluorin pH5
Blocking Wavelength Range (nm):
200 - 1200
Bandwidth (nm):
45
Clear Aperture CA (mm):
8.5
Surface Quality:
80-50
Angle of Incidence (°):
0
Construction:
Mounted in Black Anodized Ring
Environmental Durability:
MIL-STD-810F, Section 507.4
Mount Thickness (mm):
5.0 ±0.1
Physical Durability:
MIL-C-48497A, Section 3.4.1
Substrate: Many glass manufacturers offer the same material characteristics under different trade names. Learn More
Optical Glass
Substrate Thickness (mm):
3.5 ±0.5
Type:
Bandpass Filter
Typical Light Sources:
475 and 488nm Laser; 520nm LED

Regulatory Compliance

RoHS 2015:
Reach 219:

Product Family Description

  • High Transmission, Deep Blocking
  • Broad Bandwidths Ideal for Imaging Applications
  • Available in VIS and IR Center Wavelengths
  • Hard Coated OD 4.0 10nm and 25nm Bandpass Filters Also Available

TECHSPEC® Hard Coated OD 4.0 50nm Bandpass Filters are ideal for eliminating unwanted background noise and enhancing the signal to noise ratio for a range of imaging applications including machine vision inspection, fluorescence microscopy, and a variety of biotech instrumentation. Unlike traditional filters, which require multiple substrates and coatings, these hard coated filters are fabricated using only a single substrate. The hard coated, single substrate fabrication offers deeper blocking, higher transmission, and steeper slopes than traditional coated filters.

Note: These filters are optimized for high spectral performance rather than high Laser Induced Damage Thresholds (LIDT). A typical LIDT for these filters is 1 J/cm2 @ 532nm, 10ns. Please contact us if you require a filter with a higher LIDT value.

All mounted TECHSPEC® Optical Filters have an arrow on the side of the mount that points to the filter-coated surface for quick reference. Filter oriented such that arrow points to filter coated surface S1. Anti-reflective (AR) coating is applied to S2.
All mounted TECHSPEC® Optical Filters have an arrow on the side of the mount that points to the filter-coated surface for quick reference. Filter oriented such that arrow points to filter coated surface S1. Anti-reflective (AR) coating is applied to S2.
Title  Type Compare Stock Number  Price Buy
12.5/12.7mm Optic Dia., SM05 Thin Mount, M4 Fixed #13-789 $15.50 Request Quote
  • Contact Us
    ×
12.5/12.7mm Optic Dia., SM05 Thin Mount, 8-32 Fixed #13-790 $15.50 Request Quote
  • Contact Us
    ×
12.5/12.7mm Optic Dia., E-Series Kinematic Mount Adjustable - Tip-Tilt #15-865 New
×
$39.00
Qty 10+ $37.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., L-Slot Direct Mount Fixed #36-416 $44.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Side Flange Direct Mount Fixed #36-418 $44.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., L-Slot and Rotation Direct Mount Adjustable - Rotary #36-417 $74.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Kinematic Mount, 2-Screws Adjustable - Tip-Tilt #58-850 $95.00
Qty 5+ $85.50 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Compact Kinematic Mount, 2-Screws Adjustable - Tip-Tilt #34-720 $105.00 Request Quote
  • Contact Us
    ×
12.5/12.7mm Optic Dia., Kinematic Mount, 3-Screws Adjustable - Tip-Tilt #58-853 $105.00
Qty 5+ $94.50 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Compact Kinematic Mount, 3-Screws Adjustable - Tip-Tilt #34-721 $115.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., X-Y Translating Optic Mount Adjustable - Linear (XY) #62-955 $212.50
Qty 5+ $201.75 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Top Adjust Kinematic Mount, Lead Screw Adjustable - Tip-Tilt #13-768 $220.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Top Adjust Kinematic Mount, Micrometer Adjustable - Tip-Tilt #13-769 $236.00 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., Precision Gimbal Mount Adjustable - Gimbal #84-640 $346.00
Qty 5+ $311.50 Request Quote
  • In Stock
    ×
12.5/12.7mm Optic Dia., X-Y-Z Translating Optic Mount Adjustable - Linear (XYZ) #62-958 $350.00
Qty 5+ $332.50 Request Quote
  • In Stock
    ×
2.0 - 35.0mm Optic Dia., Three-Screw Adjustable Ring Mount Fixed #03-668 $51.00
Qty 10+ $46.00 Request Quote
  • In Stock
    ×
9.5 - 73.0mm Optic Dia., Three-Screw Adjustable Ring Mount Fixed #36-605 $63.75
Qty 10+ $57.50 Request Quote
  • In Stock
    ×
7.0 - 40.0 Optic Height, English Bar-Type Optic Holder Fixed #03-676 $85.00
Qty 10+ $76.50 Request Quote
  • In Stock
    ×
5.0 - 25.0mm Optic Height, Metric Bar-Type Optic Holder Fixed #55-529 $85.00
Qty 10+ $76.50 Request Quote
  • In Stock
    ×
7.0 - 67.0 Optic Height, English Bar-Type Optic Holder Fixed #03-669 $91.25
Qty 10+ $82.25 Request Quote
  • In Stock
    ×
10.0 - 60.0mm Optic Height, Metric Bar-Type Optic Holder Fixed #55-530 $91.25
Qty 10+ $82.25 Request Quote
  • In Stock
    ×
8.0 - 118.0 Optic Height, English Bar-Type Optic Holder Fixed #03-666 $95.25
Qty 10+ $85.75 Request Quote
  • In Stock
    ×
2"/50.8mm Diameter, Bar Type Lens / Filter Holder, Quick Start Optical Mounts Fixed #17-530 $121.50 Request Quote
  • Contact Us
    ×
4.0 - 36.0mm Optic Dia., Self-Centering Jaw Clamp Fixed #16-077 New
×
$130.00
Qty 5+ $117.00 Request Quote
  • In Stock
    ×
5.0 - 100.0mm Optic Dia., Self-Centering Jaw Clamp Fixed #16-078 New
×
$340.00
Qty 5+ $306.00 Request Quote
  • In Stock
    ×
×