Lens Modification Quote Request Form – Step 1 of 2
Please complete the form below to request a quotation for a customized lens. First, type the stock number of the off-the-shelf lens that is the closest match to your requested item so that it may be used as a reference lens. Next, select the required anti-reflection or reflection coating. After, fill in the finished part diameter and check the box if edge blackening is needed to decrease stray light. Lastly, please provide the requested quantity, information about the application, and any additional requests or notes.
Stock number is required
Please specify a valid quantity.
Please specify if these products will be used in a defense, weapon, or nuclear application and/or should they be subject to U.S. ITAR controls.
Please complete the reCAPTCHA.
|Typical Finished Part Specifications|
|Modified Dimension Tolerance||±0.1mm|
|EFL||Based on the product selected.|
|Beam Deviation||3-5 arcmin|
|Clear Aperture||80% of outer dimension|
|Irregularity (Plano/Spherical)||Based on the product selected.|
|Bevel FW Tolerance||MIN = NONE, MAX = 0.5mm|
|Bevel Angle Tolerance||@45° ±15°|
|Edge Chips||≤0.5mm outside the clear aperture|