Our team is ready to assist you!
Although distortion can often be troublesome in measurement applications, it is important to note that no information about the object is actually lost, but merely misplaced in the image. Using these targets, one can easily determine the precise amount of distortion present and back it out of measurements. The dot center can be located using blob (or centroid) analysis in measurement software. To accommodate the expanding variety of image analysis software and applications, we offer fixed frequency and variable frequency targets.
The fixed frequency targets are available in a variety of dot size/spacing combinations to complement our full line of imaging lenses. Select a target to cover your entire field of view while maintaining an adequate number of dots across the field, and an adequate number of pixels per dot. The 3 or 5 grids on the multi-frequency target scale down so that one target can be used for a variety of lenses and fields of view. Both types of targets are available in a chrome on glass or chrome on opal target to accommodate transmission or reflection based on applications respectively. Included in the packaging is a serialized NIST Traceable Certificate of Accuracy per MILSTD-45662A.
|Chrome on Glass and Chrome on Opal Targets||White Reflective Mylar® Targets|
|Placement of Square Arrays||±0.004mm||±0.02mm|
|Dot Center to Center Spacing||±0.0025mm||±0.013mm|
|Grid Corner to Corner Accuracy||±0.004mm||±0.2mm|
|3 Frequency Glass Targets||50.00mm||25.00mm||12.50mm||N/A||N/A|
|5 Frequency Glass Targets||50.00mm||34.00mm||20.00mm||10.00mm||5.00mm|
|3 Frequency Mylar Targets||150.00mm||75.00mm||37.50mm||N/A||N/A|
|5 Frequency Mylar Targets||150.00mm||102.00mm||72.00mm||48.00mm||24.00mm|